140
Fanalino posteriore (fig. 28)
Svitare le viti «A» che fissano il catadiottro al corpo
fanalino; premere le lampade verso l'interno ruotandole
contemporaneamente e sfilarle dai portalampade.
Indicatori di direzione anteriori e posteriori
(figg. 27-28)
Svitare le viti «D» che fissano i catadiottri agli indicatori
di direzione; premere le lampade verso l'interno
ruotandole contemporaneamente e sfilarle dai
portalampade.
N.B. - Non serrare eccessivamente le viti che
fissano i catadiottri in plastica onde evitarne
la rottura.
A
D
Tall light (fig. 28)
Unscrew the screws "A" whichattach the reflector to the
light body; at the same time press the lights inward while
rotating them and unscr ew them from the light-sockets.
Front and rear direction indicators
(figs. 27-28)
Undo the screws «D» holding the reflector to the direc-
tion indicator unit. To remove the bulb from the bulb
holder, press in and turn.
N.B. - Do not overtighten the reflector retain-
ing screws as this will break the reflector.
28