Inhaltsverzeichnis
Werbung
HSS – Überwachungssysteme für die Rumpfbelastung
0
1
2
$xxHSS, c--c, x.x, A, *hh<cr><lf>
0: Kopf 1: Messpunkt-ID 2: Messwert
3: Datenstatus, A = Daten gültig, V = Daten ungültig 4: Prüfsumme
Hinweis: Dies muss durch die Schiffsklassifikation verifiziert werden. Der VDR muss solche
Daten protokollieren, falls HSS auf dem Schiff montiert ist.
HTC – Befehl zur Steuerung des (Karten)kurses
$--HTC,A,x.x,a,a,a,x.x,x.x,x.x,x.x,x.x,x.x,x.x,a*hh<CR><LF>
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | +---------------------------- 7
| | | | | +-------------------------------- 6
| | | | +----------------------------------- 5
| | | +------------------------------------- 4
| | +--------------------------------------- 3
| +------------------------------------------ 2
+--------------------------------------------- 1
1. Override, A = in use, V = not in use
2. Commanded rudder angle, degrees
3. Commanded rudder direction, L/R = port/starboard
4. Selected steering mode
5. Turn mode R = radius controlled
T = turn rate controlled
N = turn is not controlled
6. Commanded rudder limit, degrees(unsigned)
7. Commanded off-heading limit, degrees(unsigned)
8. Commanded radius of turn for heading changes, n.miles
9. Commanded rate of turn to heading changes, deg/min
10. Commanded heading-to-steer, degrees
11. Commanded off-track limit, n.miles(unsigned)
12. Commanded track, degrees
13. Heading reference in use, T/M
14. Checksum
30
3
4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| +----- 13
|
|
|
|
| +-------- 12
|
|
|
| +------------ 11
|
|
| +---------------- 10
|
| +-------------------- 9
| +------------------------ 8
(PAS 102)
| |
| +--- 14
Werbung
Inhaltsverzeichnis
