Yamaha P-90 Bedienungsanleitung Seite 57

4. PROGRAM CHANGE
Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
Printed on the [VARIATION]
panel button
OFF GrandPiano1
GRANDPIANO 1
ON (Variation)
OFF GrandPiano2
GRANDPIANO 2
ON (Variation)
OFF E.Piano1
E.PIANO1
ON (Variation)
OFF E.Piano2
E.PIANO2
ON (Variation)
OFF Clavi.
CLAVI./HARPSI.
ON Harpsichord
OFF Vibraphone
VIBES/GUITAR
ON NylonGuitar
OFF ChurchOrgan
CHURCH
ORGAN
ON (Variation)
OFF JazzOrgan
JAZZ ORGAN
ON (Variation)
OFF Strings
STRINGS
ON SlowStrings
OFF Choir
CHOIR
ON SlowChoir
OFF WoodBass
WOOD BASS
ON (Variation)
OFF E.Bass
E.BASS
ON (Variation)
• When program change reception is turned OFF in the Func-
tion mode, no program change data is transmitted or
received. Also, Bank MSB/LSB is not transmitted or received.
5. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
Data Transmission
Transmitted every Received as 96-clock tempo timing
F8H
96 clocks when MIDI clock is set to External
Recorder start
FAH Recorder start Not received when the MIDI clock is
set to Internal.
Recorder stop
FCH Recorder stop Not received when the MIDI clock is
set to Internal.
If a signal is not received via MIDI for
more than 400 milliseconds, the same
Transmitted every processing will take place for All
FEH
200 milliseconds Sound Off, All Notes Off and Reset All
Controllers as when those signals are
received.
• Caution: If an error occurs during MIDI reception, the Damper,
Sostenuto, and Soft effects for all channels are turned off and
an All Note Off occurs.
P.C.#=Program Change number
MSB LSB P.C#
Voice Name
(0-127) (0-127) (1-128)
0 122 1
0 123 1
0 112 1
0 112 2
0 122 6
0 122 89
0 122 5
0 123 5
0 122 8
0 122 7
0 122 12
0 122 25
0 123 20
0 122 20
0 122 17
0 123 17
0 122 49
0 122 50
0 122 53
0 123 53
0 122 33
0 124 33
0 122 34
0 122 36
Reception
6. SYSTEM EXCLUSIVE MESSAGES
(Yamaha MIDI Format)
Panel Data Transmit
Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> [F7H]
F0H, 43H, 0nH, 7CH (n: channel number)
00H, 2BH (data length)
43H, 4CH, 20H, 20H (CL)
43H, 4CH, 50H, 27H, 30H, 33H (CLP'03)
30H, 30H (version x, y)
[PANEL DATA]
[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)
F7H
• Panel Data Contents
(1) 1'st Voice
(2) Dual On/Off
(3) Dual Voice
(4) Dual Balance
(5) Dual Detune
(6) Dual Voice1 Octave
(7) Dual Voice2 Octave
(8) Dual Voice1 Effect Depth
(9) Dual Voice2 Effect Depth
(10) Split On/Off
(11) Split Voice
(12) Split Point
(13) Split Balance
(14) Split Voice1 Octave
(15) Split Voice2 Octave
(16) Split Voice1 Effect Depth
(17) Split Voice2 Effect Depth
• Panel data send requests cannot be received.
7. SYSTEM EXCLUSIVE MESSAGES
(Universal System Exclusive)
(1) Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[llH] -> [mmH] -> [F7H]
MIDI Master Volume
• Simultaneously changes the volume of all channels.
• When a MIDI master volume message is received, the volume
only has affect on the MIDI receive channel, not the panel
master volume.
F0H = Exclusive status
7FH = Universal Realtime
7FH = ID of target device
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH = Volume MSB
F7H = End of Exclusive
or
F0H = Exclusive status
7FH = Universal Realtime
XnH = When n is received n=0~F, whichever is received.
X = don't care
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH = Volume MSB
F7H = End of Exclusive
(18) Split Dumper Mode
(19) Reverb Type 1
(20) Reverb Type 2
(21) Reverb Depth 1
(22) Reverb Depth 2
(23) Effect Type 1
(24) Effect Type 2
(25) Effect Depth
(26) Variation On/Off
(27) Touch Sensitivity
(28) Fixed Data
(29) Absolute tempo low byte
(30) Absolute tempo high byte
(31) Key-Off Sampling Depth
P-90
57