Midi-Datenformat - Yamaha CLP-411 Bedienungsanleitung

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato
If you're already very familiar with MIDI, or are using a
computer to control your music hardware with computer-
generated MIDI messages, the data provided in this section
can help you to control the Clavinova.
Falls Sie bereits mit MIDI vertraut sind oder einen Compu-
ter zur Erzeugung von MIDI-Steuermeldungen für die
Instrumente verwenden, können Sie sich zur Steuerung des
Clavinovas nach den im folgenden Abschnitt aufgeführten
Spezifikationen richten.
1. NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /
Receive: 00H ~ 7FH = C-2 ~ G8)
vv = Velocity (Key ON = 1 ~ 127. Key OFF = 0)
Data format: [8nH] -> [kk] -> [vv]
8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity (Key OFF = 0 ~ 127)
* 8nH (note off) is receive only.
9nH (vvH=00H) used for transmission.
2. CONTROL CHANGE & MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc = Control number
vv = Data Range
2.1 Control Change
2.1.(1) Bank Select
Cntrl# Parameter
0 Bank Select MSB 0:Normal
32 Bank Select LSB
A new bank selection does not become effective until receipt of the
next Program Change message.
2.1.(2) Main Volume (reception only)
Cntrl# Parameter
7 Volume MSB
2.1.(3) Expression
Cntrl# Parameter
11 Expression MSB
2.1.(4) Damper
Cntrl# Parameter
64 Damper MSB
Half pedal continuous data is received and accepted.
2.1.(5) Sostenuto
Cntrl# Parameter
66 Sostenuto
2.1.(6) Soft Pedal
Cntrl# Parameter
67 Soft Pedal
2.1.(7) Attack Time
Cntrl# Parameter
73 Attack Time
2.1.(8) Effect1 Depth ( Reverb Send Level )
Cntrl# Parameter
91 Effect1 Depth
Adjusts the reverb send level.
44
Data Range
0...127
112 Variation Off
113 Variation On
Data Range
0...127
Data Range
0...127
Data Range
0...127
Data Range
0...127
(0-63:off, 64-127:on)
Data Range
0...127
(0-63:off, 64-127:on)
Data Range
0...127
Data Range
0...127
Si vous êtes très familier avec l'interface MIDI ou si vous
utilisez un ordinateur pour commander votre matériel de
musique au moyen de messages MIDI générés par
ordinateur, les données suivantes vous seront utiles et vous
aideront à commander le Clavinova.
SI usted está ya familiarizado con MIDI, o si emplea una
computadora para controlar sus aparatos musicales con
mensajes MIDI generados por computadora, los datos
proporcionados en esta sección le ayudarán a controlar la
Clavinova.
2.1.(9) Effect4 Depth ( Variation Effect Send Level )
Cntrl# Parameter
94 Effect4 Depth
2.2 Mode Messages
The following Channel Mode messages are supported. (But the
actual mode is fixed to Poly and can not be changed.)
Cntrl# Parameter
120 All Sound Off
121 Reset All Controllers
123 All Notes Off
124 Omni Off
125 Omni On
126 Mono
127 Poly
2.2.(1) All Sound Off
Switches off all sound from the channel. Does not reset Note On
and Hold On conditions established by Channel Messages.
2.2.(2) Reset All Controllers
Resets controllers as follows.
Controller Value
Expression 127 (max)
Damper Pedal 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
2.2.(3) All Notes Off
Switches off all of the channel's "on" notes. Any notes being held
by DAMPER or SOSTENUTO continue to sound until DAMPER/
SOSTENUTO goes off.
2.2.(4) Omni Off (reception only)
Same processing as for All Notes Off.
2.2.(5) Omni On (reception only)
Same processing as for All Notes Off.
2.2.(6) Mono (reception only)
Same processing as for All Sound Off.
2.2.(7) Poly (reception only)
Same processing as for All Sound Off.
* When control change reception is turned OFF in the Function
mode, no control change data is transmitted or received.
* Local on/off, OMNI on/off are not transmitted. (The appropriate
note off number is supplied with "All Note Off" transmission).
* When a voice bank MSB/LSB is received, the number is stored
in the internal buffer regardless of the received order, then the
stored value is used to select the appropriate voice when a
program change message is received.
* The Multi-timbre and Poly modes are always active. No change
occurs when OMNI ON, OMNI OFF, MONO, or POLY mode
messages are received.
Data Range
0...127
Data Range
0
0
0
0
0
0 ~ 16
0