Separating The Connection; Re-Establishing The Connection; Using The Hands-Free Appliance; Call Function - Silvercrest SBTF 10 B2 Bedienungsanleitung

Separating the connection

If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
®
Bluetooth appliance:
●
Switch the hands-free appliance off
or
●
separate the connection over the Bluetooth
the mobile telephone.
You need not erase the coupling with the hands-free appli-
ance in the Bluetooth

Re-establishing the connection

If you want to reconnect the hands-free appliance with the
last used mobile phone:
●
Check to see that Bluetooth
telephone, then switch the hands-free appliance on.
When connecting to a previously coupled mobile telephone
it is not necessary to enter a pass-code. You can set your
mobile telephone so that when the hands-free equipment is
switched on a connection with the mobile telephone is auto-
matically established. As soon as the hands-free equipment
is connected to the previously coupled mobile telephone a
short, high signal tone is emitted confi rming the connection.
Further information regarding automatic coupling can be
found in your mobile telephone's operating instructions.

Using the hands-free appliance

After successful coupling, the following functions are
available to you. Some of the described functions are
only possible with a mobile telephone that supports the
Handsfree Profi le (HFP).

Call function

●
Use your mobile telephone in the usual way to make a call.
●
For redialing of the last number called, shortly press
the multi-function button 7 twice.
●
For activation of voice dialling, shortly press the multi-
function button 7 once.
SBTF 10 B2
®
menu to separate the connection.
®
is activated in the mobile
®
menu in
41
GB