Storch 266865 ProDist compact Handbuch Seite 66

Area measurement
Briefly press the
The (area)
is shown in the display.
Press the button to measure
the first distance
length)
Press the button to measure
t h e second
(e.g., width)
The result is automatically deter-
mined and shown in an xx² for-
mat.
Volume measurement
Press the button twice until
the (volume) symbol is
shown in the display.
Press the button to measure
the first distance
length)
Press the button to measure
t h e second
(e.g., width)
Press the button to measure
the third distance
height)
The result is automatically deter-
mined and shown in an xx³ for-
mat.
Indirect measurement (Pythago-
ras)
determining a distance with two
measurements
Indirect measuring is used to
measure distances that cannot
be measured directly because an
obstacle would block the laser
beam, or there is no suitable tar-
button.
get surface as a reflector.
s y m b o l
Indirect measurement for deter-
mining a distance with 2 auxiliary
measurements.
(e.g.,
Press the
distance
play. The distance to measure
first is shown as a flashing line in
the symbol.
Point to the top point and press
the
measurement, the first value is
displayed. Now level the laser
measuring device horizontally to
the extent possible.
(e.g.,
Initiate the second measurement
by pressing the
distance
The result is automatically deter-
mined and shown in the display.
(e.g.,
66
button until the
symbol appears in the dis-
button. After the first
button.