Operation, Scope Of Supply, Accessories; Symbols In This Manual; Intended Use; Scope Of Supply - EFA SK18 WB Betriebsanleitung

1. Operation, Scope of Supply,

Accessories

Notes, read carefully!
This manual is intended for the machine operator.
Keep it in a safe place!
The breaking saw may only be operated:
In a technically safe condition, for its intended
use and in accordance with the applicable safety
and accident prevention regulations
With all the safety devices attached
In accordance with the safety precautions
When the operating personnel has read and
understood this manual, in particular Chapter 2.
and Chapter 3.
Only in this way can incorrect operation be avoided
and hazard situations correctly assessed.
Never reach into the area of the
saw blade to avoid the risk of
cutting off limbs!
Wear eye protection or safety
goggles when working with the
saw!

1.1 Symbols in this Manual

Hazard symbol:
The greatest care and attention must
be taken here. Lack of attention can
result in an immediate risk of injury for
the operating personnel or third par-
ties.
Furthermore, the machine may be damaged.
Information symbol:
Texts marked with this symbol con-
tain important information and
useful tips.

1.2 Intended Use

1.2.1 Field of use
The breaking saw is used for breaking cows, calves,
pigs and sheep.
The machine is not equipped for any other form of
use. Should the operator wish to use the saw in
some other way, please consult Schmid & Wezel
Schmid & Wezel
D 75433 Maulbronn
GmbH & Co. (S&W) beforehand.
Use in any other way may result in a risk of acci-
dents and increased wear to the saw. The user alo-
ne bears the liability for the consequences of any
other form of use.
1.2.2 Residual risks
The breaking saw is designed for industrial use on
animal carcasses. There is a risk of injury. Gross ne-
gligence in the use of the saw may even result in fa-
tal injuries; this means that improper use of the saw
could lead to instant death or to death by bleeding.
Be sure therefore to always use the machine in the
proper manner.

1.3 Scope of Supply

Breaking saw
Saw blade, 6 mm teeth
1.4 Accessories
Single-head wrench
Retention pin
The order numbers for both the parts contained in
the scope of supply and for accessories can be
found in Annex A.3 "Liste der Ersatz- und Ver-
schleißteile/ List of spare and wear parts" (p. 22).

2. Safety precautions

2.1 General safety precautions

Be sure to observe the following safety pre-
cautions when working with the breaking
saw.
Changing the saw blade as well as installation,
maintenance and repair work may only be car-
ried out when the machine is disconnected from
the mains supply!
Select personal protection equipment according
to the regulations applicable on the premises
and to the accident prevention regulations in
force.
It is assumed that the operating personnel is
sufficiently familiar with the use of breaking
saws
Instruction is provided by our specialist person-
nel
Installation, maintenance and repair work may
only be carried out by authorised and qualified
personnel
Seite/ Page
12/ 27
Ausführung/ Version
05.2007