Additional Information; On Screen Display - Sony DAV-D150E Bedienungsanleitung

Additional Information

If Timer record events Overlap...
Do not overlap programmes, since overlapping portions
of the conflicting programmes will not be recorded.
Earlier recording times have priority over later recording
times as shown in the diagram.
16:00
Case A:
Program 1
Program 2
Case B:
Program 1
Program 2
Case C:
Program 1
Program 2
: This potion will not be recorded.
Change (Deleting) the Timer Programme
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so with-
out having to enter all the timer event information again.
Simply display the timer event screen. Press V or v to
select the event that you wish to delete or change.
Press B to delete the event...or
Press ENTER/OK to change; then press B or b to
select; Station, Date, Start and End times, VPS/PDC
and LP. Press V or v to enter the correct information.
Video Programme System (VPS)
The Video Programme System (VPS) ensures that the
TV programmes that you have programmed for timer
recording will be recorded exactly from their beginning
to end, even if the actual broadcasting time differs from
the scheduled time due to delayed start, or if the pro-
gramme is extended beyond its scheduled time. Also, if
a programme is interrupted, for example, if a news flash
is inserted, the recording will also be interrupted auto-
matically and resumed when the programme continues.
The VPS signal is broadcast by the TV station and this
controls the timer in the video recorder.
VPS should be set ON for all timer recordings from TV
stations broadcasting these signals. It should be set
OFF for all timer recordings from TV stations that are
not broadcasting these signals.
*** The similar system PDC, which is used in the time
being in the Netherlands, can also be used with your
new video recorder.
30 GB
17:00 18:00
On Screen Display (OSD)
You may easily display the clock or tape counter and
tape remaining, day, month, year, day of week,
programme channel, tape speed and VIDEO function
on the TV screen.
If a recording is taking place these On Screen Displays
will not be recorded onto the tape.
Press DVD DISPLAY (CLK/CNT) to display.
1 1
Press DVD DISPLAY (CLK/CNT) repeatedly to
2 2
display the tape counter.
During playback or recording, the tape remaining is
displayed with the tape counter.
After 3 seconds the display will clear from the
3 3
TV screen, leaving only the clock or tape count-
er and tape remaining on the TV screen.
Press DVD DISPLAY (CLK/CNT) again to remove
all displays from the TV screen.
The tape remaining will only be accurate for E-180
and E-240 tapes.
The tape remaining indicator may not be accurate,
since it depends on the type or condition of tape
used. Also, the tape remaining indicator is not dis-
played just after a cassette has been inserted, or
after playback or recording has begun.