SILANOS 1000 Gebrauchsanweisung Seite 25

17 ELECTRONIC MODELS
Before powering the machine make sure that all points indicate in the paragraph 9 have been checked.
START UP AND FILLING THE TANK.
When the hood is closed press the push button 2, lamp will start flashing red and tank and boiler will start to fill.
Lamp will become green when filling of tank and boiler will be ready.
STARTING.
Wait until the machine has reached the right temperature showed on the display, carry out one empty cycle then
place the basket in the dishwasher having removed scraps from the dishes.
Select the wash cycle using push buttons 3-4-5 or 7:
- push button 3: short cycle
- push button 4: medium cycle
- push button 5: long cycle
- push button 7: on going cycle maximum 600 seconds
During the cycle display will show the temperature of wash phases, wash before and rinse after, at the end of cycle
rinse temperature will be showed on display.
Wash time and temperatures can be modified but this operation must be done only by engineers
qualified by the manufacturer.
The machine guarantee rinse temperature at 82°C thanks to a control device on wash time that will going on until
rinse temperature will be correct.
Please note in case of hood opening wash cycle will be stopped and erased, to stat again close the hood and push
the wash button cycle again.
Short cycle Medium cycle Long cycle
25 ENGLISH