Special Functions; All Off Function; Battery Status; Troubleshooting - Medion LIFE E74003 Handbuch

Special functions

ALL OFF function

You can switch off all pre-programmed devices at the same time. This is done as
follows:
Press the key ALL OFF. Now all pre-programmed devices will be switched off
consecutively.
Some devices can be switched on and off with the ALL OFF key. Devices
switched off in such a way will be switched back on after carrying out the ALL
OFF function.

Battery status

The battery charge will have been exhausted and the batteries will have to be
replaces, if the LED begins to flash automatically. Macros already stored,
programmed functions and stored codes will be retained during this.

Troubleshooting

The remote control does not work:

Check whether your devices have been properly connected and are switched
on.

Check whether the remote control batteries have been correctly inserted and
have matching +/- polarity.

If the batteries are too weak then replace them with new ones.
There are several device codes listed under the brand name of my device. How
do I determine the correct device code?

To determine the correct device code for your device, try each consecutive
code until most of the functions of the device function properly.
The devices only respond to a few remote control commands:

Continue testing further codes until the devices respond to the commands
accordingly.

If manual code entry and automatic code search are unsuccessful, it may be
that the device is not compatible to your universal remote control.

Cleaning

Clean the device with a dry or lightly dampened, lint free cloth. Do not use any
corrosive or aggressive cleaning products.
14