Included the box
Touch screen remote control
3 micro batteries LR03 "AAA"
Instructions and guarantee documents
Scope of application
This universal remote control has ten source keys and therefore can replace up
to ten normal remote controls ("10 in -1 function"). These may be remote
controls for practically every type of remote-controlled consumer electronics
(see the supplied code list).
The labels TV1, TV2, SAT1, SAT2, DVD, VCR, AUDIO, TUNER, TAPE and
AUX on the source keys are for overview purposes. With the exception of the
TV key you can assign any key to any device ("Flex Mode").
Start of operation
Inserting batteries
Three AAA LR03 micro cell batteries are included in the delivery.
Remove the battery compartment cover by pushing the clip to the bottom.
Insert the batteries. Pay attention at the same time to the polarity, which is
represented in the compartment.
Replace the cover.
Replacing batteries
Before inserting the batteries, check that the contacts in the device and on the
batteries are clean and, if necessary, clean them.
Insert the batteries, as described above.
When you remove the batteries, the programmed settings will remain
stored.
ES
EN
DE
7