Toggle Function; Autozapping; Normal Use; Universal Functions - Medion MD 4689 Anleitung

Univ-FB MD 4689 ML.book Seite 19 Mittwoch, 5. Juli 2006 9:46 09

TOGGLE FUNCTION

You can zap between 2 distant channels by pressing "P<P" key. Proceed as follow:
1. Switch on manually the appliance you wish to control (TV, VCR etc...)
2. Press and hold the "SET" key for 3 sec. about, until the LED indicator lights
continuously.
3. Release the "SET" key.
4. Press "P<P" key and the mode key of the device you wish to control.
5. Enter the first channel number (3 digits as a max)
6. Press again "P<P" key and the mode key of the device you wish to control
7. Enter the second channel number (3 digits as a max)
8. Press "P<P" key to end the setting
Certain TV sets have also a Toggle function (depending on the manufacturer, it can
zap from the present and the previous channel). This function can be activated by
pressing A/V or -1-- keys on your remote control.

AUTOZAPPING

When the TV mode key is selected, if you press once on the SHOWVIEW key, all
the stocked channels will be scanned (point the remote control at the device). To
stop the scanning, press once CHAN- key.

NORMAL USE

After having finished the setup of all A/V appliances, the MD 4689 remote control
exactly activates the main functions as your original remote control. Paint the
remote at the selected appliance and press the desired Mode key. Now all the
functions of the selected device can be activated with your MD 4689 remote
control. For each transmitted IR signal, the MODE key lights on.

UNIVERSAL FUNCTIONS

Certain functions such as the "volume", "mute", may be activated whatever the
Mode key which is functioning.
Example: The last selected appliance is a VCR, but you would like to control the
volume of your TV. Proceed as follow:
1. Press the TV mode
2. Press and hold the "SET" key for 3 sec. about, until the LED indicator lights
continuously.
3. Release the "SET" key.
4. Press the "Mute" key during 8 seconds about, till the LED turns on a second
time

SHIFT FUNCTION

Certain keys of the remote control may include a second function. To access to this
second function, press and release "SET" key (the LED blinks), then press the key
corresponding to this second function.

TROUBLE SHOOTINGS AND SOLUTIONS

The remote doesn't work:
• Are the A/V appliances plugged in and turned an
• Check that the batteries have the correct polarity position in the battery com-
partment
• If the batteries are too weak, change them by new ones.
Several codes are available under my appliance brand. Which one is right?
To find the right code, try the codes of the list one by one, till you find one which
makes the remote control work correctly.
The A/V appliances do not respond to certain remote control orders.
Try other codes till the appliances react correctly at the commands.
If you do not succeed, either with the manual code search or with the automatic
code search, it means that your appliance may not be compatible with the remote
control.
EN-19