Inhaltsverzeichnis
Werbung
Before reassemblying the different components :
-
Clean the parts with the appropriate cleaning solvent.
Install new seals if it is necessary, after having lubricated them with PTFE grease.
-
-
Lubricate the piston and the inside of the cylinder to prevent from damaging the seals.
Install new parts if it is necessary.
-
DEGREES OF WEAR
The wetted parts in contact with the material are subject to wear with time. It depends, of course, on the
rates and duration of pump operating; also on the material handled.
Under normal operating and servicing conditions, with standard filled material not including foreign
matters or chemically aggressive, the average working life can be estimated as :
1 million strokes for the tightness seals.
-
10 millions strokes for the bellows.
-
KREMLIN REXSON
- 4 -
N° : 578.065.110-UK-1202
Werbung
Inhaltsverzeichnis
