Leckey Squiggles Bedienungsanleitung Seite 23

8.9 Flat Headrest
To attach the headrest cushion, place the
cushion onto the head support plate,
then snap the central fastener and two
upper fasteners in place. Bring the lower
flap under the plate and snap the two
remaining fasteners in place.
8.10 Flat Headrest
Laterals
To attach the headrest lateral covers, simply
slide the covers on with the padded side
towards the inside of the stander. Then bring
the two Velcro fastener straps around the
bottom of the moulding and attach them to
the Velcro panel as shown. Close over
the flap.