Yamaha RX-V459 Bedienungsanleitung Seite 76

SET MENU
Input mode B)INPUT MODE
Use this feature to set this unit to reset "INPUT MODE"
back to "AUTO" (see page 32) regardless of the previous
setting or to recall the last input mode ("AUTO", "DTS",
or "ANALOG") used for that source whenever you turn on
this unit.
Choices: AUTO, LAST
• Select "AUTO" to reset "INPUT MODE" back to
"AUTO" (see page 32) regardless of the previous
setting whenever you turn on this unit. This unit
automatically selects input signals in the following
order:
(1) Digital signals
(2) Analog signals
• Select "LAST" to set this unit to automatically recall
the last input mode ("AUTO", "DTS", or "ANALOG")
used for that source whenever you turn on this unit.
Input rename
C)INPUT RENAME
Use this feature to change the name of the input source
that appears in the front panel display.
The following is an example where "DVD" is renamed
"My DVD".
DVR V-AUX
SP
A
DVD
1
Press one of the input selector buttons on
the remote control to select the input source
you want to change the name of.
CD MD/CD-R
DVD DTV/CBL
2
Press AMP and then press j / i on the remote
control to place the "_" (underscore) under
the space or the character you want to edit.
AMP
74
pDVD
DTV/CBL MD/CD-R TUNER CD
My DVD
TUNER
DVR V-AUX
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
3
Press u / d to select the character you want
to use and then press j / i to move to the
next space.
ENTER
ENTER
A/B/C/D/E
A/B/C/D/E
PRESET/CH
PRESET/CH
Notes
• You can use up to 8 characters for each input.
• Press d to change the character in the following order, or
press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)
4
Repeat steps 1 through 3 to rename each
input source.
5
Press SET MENU on the remote control to
exit from "INPUT RENAME".
VOLUME
dB
L C R
SL SR
Volume Trim
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL,
V-AUX, DVR
Control range: –6.0 to 6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
A/B/C/D/E A/B/C/D/E
A/B/C/D/E
SET MENU
MENU
SRCH MODE
D)VOLUME TRIM
ENTER
A/B/C/D/E
PRESET/CH