Setting The Speaker Impedance - Yamaha RX-V459 Bedienungsanleitung

CONNECTIONS

Setting the speaker impedance

CAUTION
If you are to use 4 or 6 ohm speakers, set "SP
IMP." to "6ΩMIN" as follows BEFORE using this
unit.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT
l
STRAIGHT PROGRAM
PHONES SPEAKERS
A B
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
2,5
2,4
1
Make sure this unit is in the standby mode.
See page 25 for details about turning on this unit or
standby mode.
2
Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
While holding
STRAIGHT
EFFECT
24
VOLUME
l PRESET/TUNING h MEMORY TUNING MODE
NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L
INPUT
h
VIDEO AUX
INPUT MODE MULTI CH
INPUT
VIDEO L AUDIO R
3
down
STANDBY
/ON
3
Press PROGRAM l / h buttons on the front
panel to select "SP IMP.".
The following display appears in the front panel
display.
PORTABLE
4
Press STRAIGHT (EFFECT) on the front
panel repeatedly to select "6ΩMIN".
The following display appears in the front panel
display.
5
Press STANDBY/ON on the front panel to
save the new setting and set this unit to the
standby mode.
Note
The setting you made is reflected next time you turn on this unit.
l h
PROGRAM
S P I M P . - 8 M I N
STRAIGHT
EFFECT
S P I M P . - 6 M I N
STANDBY
/ON