Selecting The Compressed Music Enhancer Mode - Yamaha RX-V459 Bedienungsanleitung

Selecting the Compressed Music
Enhancer mode
Compression artifacts (such as the MP3 format) are
created by a lossy compression scheme where the audio is
resampled to lower the bitrate and to remove sounds that
are indistinguishable to typical human hearing. The
Compressed Music Enhancer feature of this unit enhances
your listening experience by regenerating the missing
harmonics in a compression artifact. As a result, flattened
complexity due to the loss of the high-frequency fidelity
as well as lack of bass due to the loss of low-frequency
bass is compensated, providing the improved performance
of the overall sound system.
Notes
• The Compressed Music Enhancer mode is compatible with the
PCM signals (32 kHz, 44.1 kHz and 48 kHz) and the analog
2-channel input sources.
• The Compressed Music Enhancer mode is not effective with
any of the sound field programs.
• When the Compressed Music Enhancer mode is turned on while
an incompatible input source is being played back, "Not
Available" appears in the front panel display.
• When the input source is changed to an incompatible input
source while the Compressed Music Enhancer mode is turned
on, the Compressed Music Enhancer mode is automatically
turned off and the incompatible input source is played back in
2-channel or 6-channel stereo.
y
The ENHANCER indicator lights up in the front panel display
when one of the Compressed Music Enhancer modes is selected.
1
Press AMP and then press ENHANCER on
the remote control repeatedly to select the
desired Compressed Music Enhancer mode.
The following display is shown in the front panel
display and the ENHANCER indicator lights up in
the front panel display.
AMP
Lights up
DVR V-AUX
SP
ENHANCER A
ENHANCER 2CH
Choices: 2ch Stereo, 6ch Stereo, Off
• Select "2ch Stereo" to play back compression
artifacts in 2-channel stereo.
• Select "6ch Stereo" to play back compression
artifacts in 6-channel stereo.
• Select "Off " to turn off the Compressed Music
Enhancer mode.
Note
When you select "Off ", this unit returns to the previously
selected sound field program.
2
Press j / i on the remote control to select the
desired effect level.
ENTER
A/B/C/D/E
PRESET/CH
Choices: HIGH, LOW
• Select "HIGH" for a high effect level.
• Select "LOW" for a low effect level.
Note
Set the effect level to "HIGH" or "LOW" according to the
characteristics of a source. The high-frequency signals of
some sources may be emphasized too much. In this case, set
the effect level to "LOW".
USING OTHER FEATURES
ENHANCER
0
DTV/CBL DVD MD/CD-R TUNER CD
VOLUME
dB
L R
A/B/C/D/E
35