Recording - Yamaha RX-V459 Bedienungsanleitung

RECORDING

Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
Notes
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The setting of the TONE CONTROL (see page 30), VOLUME, the speaker level (see page 71) and the sound field programs
(see page 54) do not affect recorded material.
• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing
video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an
S-video or a composite video signal on your VCR.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog OUT (REC) jacks for recording.
• A given input source is not output on the same OUT (REC) channel.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.
y
Do a test recording before you start an actual recording.
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT
l
PHONES STRAIGHT PROGRAM
SPEAKERS
A B
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
POWER POWER
TV AV
CD MD/CD-R
DVD DTV/CBL
REC
42
RECORDING
VOLUME
l PRESET/TUNING h
MEMORY TUNING MODE
NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L
INPUT
h
VIDEO AUX
INPUT MODE MULTI CH
INPUT
VIDEO L AUDIO R
2
STANDBY POWER
TUNER
2
DVR V-AUX
MULTI CH IN
CODE SET
1
Turn on all the connected components.
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the source
PORTABLE
component you want to record from.
INPUT
Front panel
3
Start playback on the selected source
component or select a broadcast station.
4
Start recording on the recording component.
CD MD/CD-R TUNER
or
DVD DTV/CBL DVR
Remote control
V-AUX