Enjoying Pure Hi-Fi Stereo Sound; Displaying The Input Source Information - Yamaha RX-V459 Bedienungsanleitung

Enjoying pure hi-fi stereo sound

The "DIRECT STEREO" mode allows sources to bypass
the decoders and DSP processors of this unit so that you
can enjoy pure hi-fi sound from 2-channel PCM and
analog sources.
Press AMP on the remote control and then press
DIRECT ST. on the remote control to select
"DIRECT STEREO".
AMP
DIRECT STEREO
Notes
• To avoid unexpected noise, do not play CDs encoded in DTS
when the "DIRECT STEREO" mode is selected.
• When multi-channel signals (Dolby Digital and DTS) are input,
this unit automatically switches to the corresponding analog
input. When "DTS" is selected as the input mode (see page 32),
no sound will be output.
• No sound will be output from the subwoofer.
• "TONE CONTROL" (see page 30) and "SOUND MENU" (see
page 70) settings (except for speaker level settings) are not
effective.
• The front panel display automatically dims.
y
You can also select the "DIRECT STEREO" mode by pressing
the PROGRAM l / h buttons on the front panel repeatedly.
You can display the format, sampling frequency, channel,
bit rate, and flag data of the current input signal.
1
DIRECT ST.
8
2
3
Displaying the input source
information
Press one of the input selector buttons to
select the desired input source.
CD MD/CD-R
DVD DTV/CBL
Press AMP on the remote control and then
press STRAIGHT on the remote control to
select "STRAIGHT".
AMP
Press u / d to display the information about
the input signal.
ENTER
A/B/C/D/E
PRESET/CH
USING OTHER FEATURES
TUNER
DVR V-AUX
STRAIGHT
ENT.
STRAIGHT
A/B/C/D/E
37