Herunterladen Inhalt Inhalt Diese Seite drucken

Measuring Range; Domaine De Mesure - Tunze 7032/2 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Measuring range

Press the RANGE button (1) to select various
measuring ranges:
200 mS/cm (0.1 to 199.9) salt water
2,000 µS/cm (1 to 1,999) fresh water
200 µS/cm (0.1 to 199.9) dist.water / fresh water
Note: 1 mS/cm = 1,000 µS/cm
Determining the measuring range
The Conductivity Meter 7032/2 has a fixed measuring
range function when the unit is switched on.
Salt water and fresh water:
Place the jumper in the right position (2) in the battery
compartment. When the measuring instrument is
switched on, the measuring range is set to 200 mS
automatically. In order to select other measuring
ranges, simply press the RANGE button.
Fresh water:
Place the jumper in the left position (3) in the battery
compartment. When the measuring instrument is
switched on, the measuring range is set to 2,000 µS
automatically. In order to select 200 µS, simply press
the RANGE button.
The rule of thumb based on experience that approx.
30µS/cm equal 1° dGH (German degree of total
hardness) can be used to approximately determine
the total hardness of aquarium water. This is useful
for low-salt water up to about 600 µS/cm.

Domaine de mesure

Par simple action sur la touche RANGE (1), il
est possible de choisir différents domaines de
mesure :
200 mS/cm (0,1-199,9) eau de mer
2000 µS/cm (1-1999) eau douce
200 µS/cm (0,1-199,9) eau dist./eau douce
Remarque : 1 mS/cm = 1000µS/cm
Domaine de mesure à l'enclenchement
Le
conductimètre
fonction permettant un domaine de mesure à
l'enclenchement.
Eau douce et eau de mer :
Dans le logement batterie, positionnez le jumper
en position droite (2). Lors de l'enclenchement
de l'appareil, le domaine de mesure est 200 mS.
Autres domaines par action sur RANGE.
Eau douce :
Dans le logement batterie, positionnez le jumper
en position gauche (3). Lors de l'enclenchement de
l'appareil, le domaine de mesure est 2000 µS. Pour
200µS, action sur RANGE.
Il est possible d'établir une correspondance
conductivité / dureté pour des eaux naturellement
reconstituées et faiblement minéralisées jusqu'à
600 µS : 30µS/cm = 1°dGH (dureté all.).
7032/2
possède
une
37

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

7028/3

Inhaltsverzeichnis