Safety Information - VOLTCRAFT SL-100 Bedienungsanleitung

The following list shows the frequency response for the sound inci-
dence from the datum direction („Characteristic" column) as well as
the error limits of both devices („Accuracy" column)
Rated A -
Frequency Characteristic Characteristic
31.5 Hz -39.4 dB -3.0 dB
63 Hz -26.2 dB -0.8 dB
125 Hz -16.1 dB -0.2 dB
250 Hz -8.6 dB 0 dB
500Hz -3.2 dB 0 dB
1 KHz 0 dB 0 dB
2 KHz +1.2 dB -0.2 dB
4 KHz +1 dB -0.8 dB
8 KHz -1.1 dB -3.0 dB
30
C Accuracy Accuracy
SL-100 SL-200
+/-4 dB +/-3 dB
+/-3 dB +/-2 dB
+/-2 dB +/-1.5 dB
+/-2 dB +/-1.5 dB
+/-2 dB +/-1.5 dB
+/-2 dB +/-1.5 dB
+/-3 dB +/-2 dB
+/- 5 dB +/-3 dB
+/-6 dB +/- 5 dB
Unfavourable ambient conditions are:
- Excessive dampness or humidity
- Dust or combustible gases, vapours or solvents
- Electrical storms or stormy conditions and strong electrostatic
fields, etc.
Use other than that described above will lead to damaging the
product.
No part of the product may be modified or converted.
The safety instructions should be observed without fail!

Safety information

Please read through the operating instructions com-
pletely before setting up the system; they include
important information necessary for the correct oper-
ation.
The guarantee will lapse if damage is incurred as a
result of non-compliance with the operating instruc-
tions! We shall not be held liable for any consequential
damage or loss.
We do not accept any liability for personal injury or damage to prop-
erty caused by incorrect handling or non-observance of the safety
instructions. The warranty will be void in these cases.
This device left the factory in perfect technical condition. To main-
tain this status and ensure safe operation, the user must comply
with the safety instructions and warnings contained in these instruc-
tions for use. The following symbols should be observed:
19