Renkforce IR1 Bedienungsanleitung Seite 42

"Configuration"
"Dimmer"
"Power Management"
Here, you can set the energy savings mode. You can choose between the following times: Off, 5,
15 or 30 minutes.
"Sleep Timer"
This menu item configures the sleep timer. If you activate it (a time must be selected), the radio
will switch off automatically after the chosen time. You can choose the following times: 15, 30, 60,
90, 120, 150 or 180 minutes.
"Buffer"
You can choose an interim storage buffer of 2, 4 or 8 seconds for the radio stations here. This
means that, e.g., 2 seconds will be saved before the station is played back.
"Weather"
42
"Power Saving""
When opening this parameter, set the desired brightness and confirm with "Enter"
on the remote control, the display will be dimmed to your pre-set brightness once
the radio switches to energy savings mode.
"Turn On"
Here, you can set the brightness of the display for normal operation. To accept the
setting, you need to confirm with the button C13 after choosing the brightness.
"Show on Standby"
Here, you can select if the weather display is to be shown in standby. If you activate
the function, the display will switch between time and weather display.
"Temperature Unit"
Here, you can switch the temperature display between Celsius (°C) and Fahrenheit
(°F).
"Set Location"
Select the town for which you want to display weather data in standby. First select
the desired continent, then the country and last the town. To add this to the display,
push the button C13/A8 or C12/A9 (arrow to the right) while the weather for the cur-
rent town is displayed. Then confirm twice more with the C13/A8 button.