Renkforce IR1 Bedienungsanleitung Seite 41

"Configuration"
"Date&Time"
"Alarm"
"Language"
Here, you can choose your desired menu language. The following languages are supported:
English; German; French; Portuguese; Dutch; Danish; Polish
"Set Date and Time"
Here, you can set the date and time. Observe that this is usually done automatically
once the internet radio is connected to the internet. To change the setting, use ei-
ther the buttons 0 to 9 (D0 – D9) or the four arrow buttons (C9 – C12).
"Set Time Format"
Select the time format 12 or 24 hours here.
"Set Date Format"
Select the desired format for the date here. You have the following options: DD/MM/
YYYY (day/month/year) (standard); YYYY/MM/DD (year/month/day); MM/DD/YYYY
(month/day/year).
"Daylight Saving Time (DST)"
Switch summer and winter time recognition on or off here.
"Alarm 1 (Turn Off)"
Here, you can make all configurations for the first alarm time. See chapter 10 e) of
these instructions on how to proceed in detail.
"Alarm 2 (Turn Off)"
Here, you can make configure the second alarm time. See chapter 10 e) of these
instructions on how to proceed in detail.
"NAP Alarm (Turn Off)"
In this menu item, you can choose the time during which the radio is to wake you up.
However, the only alarm sound available here is a bleep. You can set the time to 5,
10, 20, 30, 60, 90 and 120 minutes.
"Alarm Volume"
Set the alarm volume here. This applies to all functions of the device.
41