Sharp XV-Z7000U Anleitung Seite 30

XV-Z7000U/E
AN-Z7T
No. Adjusting point
28 RGB-related
performance
checking
29 DTD perform-
ance checking
30 DVD perform-
ance checking
31 Thermistor
performance
checking
32 Auto sync
performance
checking
33 Keystone cor-
rection perform-
ance checking
34 Lamp power
changeover
performance
checking
35 Delivery set-
tings
Adjusting conditions
1. Feed the RGB signal.
1. Receive the 480P signal.
1. Receive the 480I signal.
1. Heat the thermistor with a
hair dryer.
1. Feed the phase check pat-
tern signal.
Adjusting procedure
» User adjustment:
Check the performance relating to Contrast, Bright-
ness, Red, Blue, Clock, Phase, H-POS, and V-POS.
» User adjustment:
Check the performance relating to Contrast, Bright-
ness, Color, Tint and Sharpness.
» User adjustment:
Check the performance relating to Contrast, Bright-
ness, Color, Tint and Sharpness.
» Make sure that the temperature is indicated.
» In the VGA, SVG Aand XGAmodes, make sure the
Clock, Phase, H-Pos and V-Pos settings can be au-
tomatically adjusted.
» Make sure that the keystone distortion can be cor-
rected.
» Make sure that the brightness can be changed with
the user lamp power control.
(Theater Mode on/off)
» Make the factory setting S4.
Group :SS
Subject:S4
30