Sharp XV-Z7000U Anleitung Seite 28

XV-Z7000U/E
AN-Z7T
No. Adjusting point
18 Color saturation
adjustment
19 Video white
balance adjust-
ment
20 DVD BRIGHT-
NESS adjust-
ment
21 DVD CON-
TRAST adjust-
ment
22 DVD COLOR
adjustment
Adjusting conditions
1. Feed the NTSC split color
bar signal.
2. Select the following group,
sub-group and subject.
Group : Adjust VIDEO Im-
age
Sub-group: VPC3230
Subject : Color
1. Feed the 32-step gray-
scale signal. (VIDEO)
2. Select the following group,
sub-group and subjects.
Group : Adjust VIDEO Im-
age
Sub-group: CXA2111R
Subject :
AMP-R-BLK (In R adjustment)
AMP-B-BLK (In B adjustment)
1. Feed the NTSC 10-step
signal.
2. Select the following group,
sub-group and subject.
Group : Adjust Compo-
nent (480I)
Sub-group: VPC3230
Subject : Bright
1. Feed the NTSC 10-step
signal.
2. Select the following group,
sub-group and subject.
Group : Adjust Compo-
nent (480I)
Sub-group: VPC3230
Subject : Contrast
3. Connect the synchroscope
to TP1402.
1. Feed the NTSC split color
bar signal.
2. Select the following group,
sub-group and subject.
Group : Adjust Compo-
nent (480I)
Sub-group: VPC3230
Subject : Color
Adjusting procedure
» Make sure that adjustment value is 116.
» Adjust the white balance to become the best condi-
tion.
» Make sure that adjustment value is 195.
» Adjust the Contrast just before 10-gradation starts
appearing. Then lower 1 point from the adjustment
value.
» Make sure that adjustment value is 38.
28