Sharp XV-Z7000U Anleitung Seite 26

XV-Z7000U/E
AN-Z7T
No. Adjusting point
9 RGB tone
reproduction
adjustment
10 RGB white
balance adjust-
ment
11 DTV BRIGHT-
NESS adjust-
ment
12 DTV CONTRAST
adjustment
13 DTV COLOR /
DTV TINT ad-
justment
Adjusting conditions
1. Feed the green-only
SMPTE pattern signal.
(SVGA)
2. Select the following
group, sub-group and
subject.
Group : Adjust PC Image
Sub-group: CXA2111R
Subject : AMP-BLK
1. Feed the 32-step gray-
scale signal. (SVGA)
2. Select the following group,
sub-group and subjects.
Group : Adjust PC Image
Sub-group: CXA2111R
Subject : AMP-R-BLK
(In R adjustment)
AMP-B-BLK
(In B adjustment)
1. Feed the 480P 10-step sig-
nal.
2. Select the following group,
sub-group and subject.
Group : LCD5 (CXA1839)
(480P)
Subject : DTV_Bright
1. Feed the 480P 10-step sig-
nal.
2. Select the following group,
sub-group and subject.
Group : LCD5 (CXA1839)
(480P)
Subject : DTV_Contrast
1. Feed the 480P color bar
signal.
2. Select the following group,
sub-group and subject.
Group : LCD5 (CXA1839)
(480P)
Subject : DTV_Color
DTV_Tint
Adjusting procedure
» Adjust the AMP-BLK setting so that the gradation of
the part 1 (white 95% and 100%) as shown in the
figure below is barely discernible.
» Make sure that the gradation of the part 2 (black
0% and 5%) is also discernible.
2
» Adjust the gradation balance to become the best
condition.
» Adjust DTV_Bright so that adjustment value may be-
come 32.
» Adjust DTV_Contrast so that adjiustment value may
become 43.
1 Adjust DTV_Color so that adjustment value may be-
come 0.
2 Adjust DTV_Tint so that adjustment value may be-
come 5.
26
1