could e.g. store two separate settings (see "Storing your personal ear type")
and take turns at listening with your respective ear type.
The headphone sockets have an additional function: In loudspeaker mode
(the LED beside the button with the headphone symbol is not lit), the
sockets deliver the four Dolby Surround channels. With the supplied
adaptor cables, the Dolby Surround signals can be fed to external
amplifiers. Thus, DSPpro is transformed into a full-featured Dolby Pro-
Logic decoder.
7
Recommended standard settings
Of course you should try out DSPpro and its controls and functions as you please, but listen
to some recommended settings first.
Using
RESET
you can always reset DSPpro to the factory-adjusted standard settings. Press
RESET for about 2 seconds. The DSPpro LEDs will light up to confirm your choice.
DSPpro will also return into the standard settings when it is switched off and on again.
The standard settings are:
•
THEATER
mode (i.e. cinema mode)
•
BASS
at middle position
•
VOLUME
at minimum
•
SEAT
at middle position
•
AMBIANCE
(reverberation) at middle position
Recommended settings for classical music:
For classical music which is not Dolby Surround-encoded, please use the following settings:
•
Choose
HALL
mode
•
Set DSPpro to
STEREO
(except for old mono recordings)
•
Set
BASS
to minimum
Recommended settings for pop, rock, or jazz music:
Please use the following settings for listening to pop, rock or jazz music:
•
Choose
CLUB
mode
•
Set DSPpro to
STEREO
(except for old mono recordings)
•
Set
BASS
to between middle position and minimum
•
Set
AMBIANCE
to between middle position and maximum
31