Teaching-In; Teaching-In To Homematic Devices - HomeMatic HM-LC-Dim1T-Pl-3 Bedienungsanleitung

Simply press and release the button to operate the ac-
tu-ator. Pressing and holding down the button (for more
than 4 seconds) will switch the actuator to teach-in mode.

6.2 Teaching-in

Please read this entire section before starting
the teach-in procedure.
Before being able to use your device with
QIVICON, it has to be taught-in to your
QIVICON Home Base.
Therefore, please log-in to „My QIVICON" at
www.qivicon.com/login. There, please select
„Add device" and follow the instructions.
To integrate the dimming actuator into your Home-
Matic system and enable it to communicate with
other HomeMatic devices (e.g. HomeMatic Window
Contact), you must teach it in first. You can teach-in
the dimming acutator directly to other HomeMatic de-
vices or to the HomeMatic Central Control Unit:

6.2.1 Teaching-in to HomeMatic devices

If you would like to teach-in the dimming acutator to
one or more HomeMatic devices, you must put the
29