Operation - HomeMatic HM-LC-Dim1T-Pl-3 Bedienungsanleitung

Configuring newly taught-in devices
Once you have taught-in your radiator thermostat to
the HomeMatic Central Control Unit, it will be moved to
the inbox. Here, you must configure the device and its
associated channels in order to make them available
for operating and configuration tasks. Give the device
a name and assign it to a room. You can also make
individual parameter settings.
Now you can use the „WebUI" user interface to control
your device, configure it, link it directly to other de-
vices, or use it in central control unit programs. Please
refer to the HomeMatic WebUI manual for more details
(available for download in the „Downloads" area of the
website www.homematic.com).
To execute the teach-in procedure, both of the devices
to be linked must be in teach-in mode. The actuators
do not feature a special teach-in button. To teach-in on
the actuator,
7

Operation

After teach-in has been performed, simple operator
functions are available via the taught-in control elem-
ents. Press and release the button: ON/OFF, press and
hold down the button: dim. Press the button as follows
33