Operating Status Display; Response To Power Recovery - HomeMatic HM-LC-Dim1T-Pl-3 Bedienungsanleitung

Flashing
Slow flashing
Fast flashing
1 x long, 1 x short
1 x long, 2 x short

9.2 Operating status display

The device LED lights up permanently as soon as the
dimmer is switched on.
Once the actuator has been configured via the central
control unit or a programming tool, the device LED
will indicate other device states in addition to those
already described.

10 Response to power recovery

When the operating voltage is switched on (recovery
of mains voltage), the actuator checks its components.
The LED will flash if an error is detected during this
check. This is repeated continuously and the device
Feedback
Teach-in mode
Reset
Transmit limit (duty cycle)
reached
Device defective
35