Victron energy SKYLLA-TG 24/80 Gebrauchsanweisung Seite 16

Connecting the 3phase mains
Check if the battery is already connected to the charger.
Remove the front of the battery charger to access the AC input connector.
Connect the mains PE cable (green/yellow) to the AC input connector located next to the
Magnetic Circuit Breaker, see illustration 4b.
Connect the 3 mains line cables to the Magnetic Circuit Breaker.
Plug the mains cable into the mains socket. Make sure that the mains socket is connected
to earth. The connection to the earth of the mains has to be according to applicable safety
standards.
14
Manual Titan
illustration 4b