Inhaltsverzeichnis
Werbung
EMPFANG VON DOKUMENTEN
5
Press STOP.
STOP
Operation for Network Switch System
The procedures for using the Network switch system are almost the same aa when using the unit over a normal
telephone line. When you receive calls, however, the unit will respond slightly differently as described below.
When you hear the telephone call ring pattern:
Pick up the handset and talk normally. If you hear a slow beep, it means the call is from a fax machine trying
to send a document. Press [START/KOPIE] to receive the document. If you do not pick up the handset, the fax
continues to ring until the other party hangs up. If an answering machine is connected, it takes over the call.
When you hear the fax call ring pattern:
After the fax rings, it receives the document automatically.
If you want to receive a document without ring:
First, make sure the fax is in Fax/Tel model („Fax/Tel" displayed on the LCD). Then set INCOMING RING in
the RX SETTINGS to OFF. See p. 85. When someone sends a document, the fax receives it automatically
without ringing.
76
Werbung
Kapitel
Inhaltsverzeichnis
