Beckhoff CB4055 Handbuch Seite 72

Kapitel: BIOS-Einstellungen
5.4.2.1.1 LCD Control
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ LCD Control
│
│ Primary IGFX Boot Display
│ Secondary IGFX Boot Display
│ LCD Panel Type
│ Panel Scaling
│ Backlight Control
│ BIA
│ Spread Spectrum clock Chip
│ ALS Support
│ Active LFP
│ Panel Color Depth
│
│
│
│
│
│
│
│
│
│
│
│
│
│
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
 Primary IGFX Boot Display
Optionen: VBIOS Default / CRT / EFP / LFP / EFP3 / EFP2 / LFP2
 Secondary IGFX Boot Display
Optionen: VBIOS Default / CRT / EFP / LFP / EFP3 / EFP2 / LFP2
 LCD Panel Type
Optionen: VBIOS Default / 640x480 LVDS ...1920x1080 LVDS / 2048x1536 LVDS
 Panel Scaling
Optionen: Auto / Off / Force Scaling
 Backlight Control
Optionen: PWM Inverted / PWM Normal / GMBus Inverted / GMBus Normal
 BIA
Optionen: Auto / Disabled / Level 1..5
 Spread Spectrum Clock Chip
Optionen: Off / Hardware / Software
 ALS Support
Optionen: Disabled / Enabled
 Active LFP
Optionen: No LVDS / Int-LVDS / SDVO LVDS / eDP Port-A / eDP Port-D
 Panel Color Depth
Optionen: 18 Bit / 24 Bit
Seite 72
[CRT]
[Disabled]
[VBIOS Default]
[Auto]
[PWM Inverted]
[Auto]
[Off]
[Disabled]
[Int-LVDS]
[18 Bit]
Beckhoff New Automation Technology CB4055
│Select the Video Device which
│will be activated during POST.
│This has no effect if external
│graphics present.
│Secondary boot display
│selection will appear based on
│your selection.
│VGA modes will be supported
│only on primary display
│
│
│
│────────────────────────────────│
│→←: Select Screen
│↑↓: Select Item
│Enter: Select
│+/-: Change Opt.
│F1: General Help
│F2: Previous Values
│F3: Optimized Defaults
│F4: Save & Exit
│ESC: Exit
│
│
│
│
Chipset
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│