Loading And Saving A User Profile - Elektro-Automatik PS 9000 2U Betriebsanleitung

PS 9000 2U Series
3.7

Loading and saving a user profile

The menu "Profiles" serves to select between a default profile and up to 5 user profiles. A profile is a collection of
all settings and set values. Upon delivery, or after a reset, all 6 profiles have the same settings and all set values
are 0. If the user changes settings or sets target values then these create a work profile which can be saved to
one of the 5 user profiles. These profiles or the default one can then be switched. The default profile is read-only.
Loading the default profile is equivalent to a reset.
The purpose of a profile is to load a set of set values, settings limits and monitoring thresholds quickly without
having to readjust these. As all HMI settings are saved in the profile, including language, a profile change can also
be accompanied by a change in HMI language.
On calling up the menu page and selecting a profile the most important settings can be seen, but not changed.
► How to save the current values and settings (work profile ) as a user profile
1.
Switch off the DC output and push button
setup menu.
2.
In the menu navigate to "Profiles" and push
3.
In the submenu (see figure to the right) select a user profile (1-5) to save to and push
4.
From the selection on screen chose "Save settings into Profile n" and overwrite that profile with the current
settings and values by confirming with
► How to load a user profile
1.
Switch off the DC output and push button
setup menu.
2.
In the menu navigate to "Profiles" and push
3.
In the submenu (see figure to the right) select a user profile (1-5) to load and push
4.
In the screen you can now select "View Profile n" in order to check the stored settings and to decide, whether
this profile is going to be loaded or not. Navigate to "Load Profile n" and confirm with
the profile into the work profile.
EA Elektro-Automatik GmbH
Page 54
Helmholtzstr. 31-33 • 41747 Viersen
Germany
to call the
.
.
to call the
.
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
again.
again.
to finally load
www.elektroautomatik.de
ea1974@elektroautomatik.de