teutonia Mistral S Bedienungsanleitung Seite 11

Removing the hood cover
When doing this, make sure that each cover bar is
pushed into both stitched guides. The front and back
bars must not be mixed up.
Unfolding the Chassis
Folding the Chassis
the right-hand side of the stroller has been pushed. You
can reduce the storage size further by folding down the
top of the handle.
Assembling and removing the wheels
Both hood bars must be re-
moved from the cover before
washing. (See illustration)
Loosen the screw using a
screw driver and remove the
press stud. Now pull the cover
bar out of the joint and out of
the hood cover. After wash -
ing, reassemble in reverse
order.
Pull up the folding handle 1
(hand grip) till it locks in one
sharp movement so that both
handle ends 2 fully engage in
the left and the right lock.
WARNING: Ensure that
all the locking devices
are engaged before
use.
Pivot the folding handle to the
side with the locking rods.
Now pull the two unlocking
rods on both sides 1 up -
wards and press the slide for-
wards. The chassis is folded
up to the arrester 2, which
prevents inadvertent folding.
The chassis does not fully
fold unless the foot step 3 on
Before assembling or remov-
ing the wheels, press the
locking spring 1. When as-
sembling the wheels, make
sure that the locking spring
engages properly.
Removing the swivel wheel
Assembling the wheels
INT
MISTRAL S
11