Technical Specifications - Palmer FAT50 Handbuch

iNPuT SeCTioN:
iNPuT
1/4" TS (6.3mm) unbalanced
iNPuT iMPeDaNCe: 1 MOhm
SeNSiTiviTY: -10 dBV
MaX. iNPuT LeveL: +6 dBV
FX SeND
1/4" TS (6.3mm) unbalanced
ouTPuT iMPeDaNCe: 1 kOhm
ouTPuT LeveL: -6 dBV
Max. output level: 0 dBV
FX reTurN
1/4" TS (6.3mm) unbalanced
iNPuT iMPeDaNCe: 16 kOhms
SeNSiTiviTY: -10 dBV
Max. input level: 0 Dbv
TubeS:
PreaMP
v1, v2: ECC83/ 12AX7A, high grade
v3, v4: ECC83/ 12AX7A, selected
Power aMP
v5, v6: 5881 (6L6GC), matched set
ouTPuT: 50 Watt @ 8 or 16 Ohms
LouDSPeaker (CoMbo oNLY)
12" Eminence Governor, 16 Ohms

7 TECHNICAL SPeCiFiCaTioNS:

aDDiTioNaL SPeCiFiCaTioNS
MaiNS: 230 V AC +/-10%
MaX. Power CoNSuMPTioN: 150 W
Power CoNSuMPTioN @ STaNDbY: 42W
MaiNS FuSe: 250V/ T 1 A (slo-blo)
aNoDe FuSe: 250V/ T 500mA (slo-blo)
HeaTer FuSe: 250V/ T 5 A (slo-blo)
CAUTION! Replace fuses with IEC type 127 (5 x 20 mm)
and specified rating only!
reCoMMeNDeD oPeraTiNG eNviroNMeNT: 0 - +35° C
CoMbo
DiMeNSioNS (w X H X D): 580 x 500 x 270 mm
weiGHT 30 kg
HeaD
MaSSe (w X H X D): 580 x 270 x 270 mm
weiGHT: 25 kg
Since all our products are constantly controlled
and improved, technical changes are possible
without prior notice.
19