Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPECIFICATIONS
Function: Lead und Top/Treble booster, 2 selectable Presets
Electronics: Discrete circuit with FET-Transistors at the input
Nominal input impedance: 1 M 0hm, output impedance 1k Ohm
Maximal output level before clipping: 10Volt rms
BOOST-Function: Position FLAT max. 12dB, (4 x)
Peak frequencies: F1 = 500Hz, F2 = 2kHz, F3 = 4kHz
F4 = 1000Hz, F5 = 3kHz, F6 = 6kHz
Maximal boost typical + 14dB.
Power supply: DC-Barrel connector for 5.5mm shaft with 2.1mm inner hole
Polarity: Shaft positive, pin negative (ground)
9V DC ± 10% (9 Volt stabilized direct voltage)
Current draw: max 80mA (0,08A)
Housing: 1.5mm tin sheet, Dimensions: 155mm x 135mm x 50mm
PALMER - THRUSTER: Users' Manual
Page 7
Werbung
