Setting The Clock Automatically; Image Settings; Customising A Wall Paper; Wall Paper - Sony MEX-5DI Bedienungsanleitung

Setting the clock
automatically
— CT
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (MENU).
2
Press < or , repeatedly to select
"Setup."
3
Press (ENTER).
4
Press M or m repeatedly to select "CT."
5
Press (ENTER).
6
Press M or m to select "ON."
The clock is set.
7
Press (ENTER).
The display returns to the top menu display.
8
Press (MENU).
The display returns to the normal display.
To cancel the CT function, select "OFF" in
step 6.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.

Image Settings

Customising a wall paper

— Wall Paper (Standard/Panorama/Wall
paper mode)
You can display the static image stored in a
"Memory Stick" as a wall paper.
The image data you set will be stored in this unit.
To display the pre-stored images in this unit, see
"Selecting the display mode and display pattern"
on page 13.
1
Insert a "Memory Stick" (page 10).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select

"Wall Paper."

Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
4
Press (ENTER).
5
Press M or m to select "Memory Stick."
If you want to change the display type of a
previously stored image*, select
"FlashMemory."
* You can only change a whole image that you
have stored in step 11-3.
6
Press (ENTER).
If you select "FlashMemory" in step 5, skip to
step 9.
continue to next page t
31