Overview Of Using The Flash With Sca 3501/3502M3 Adapters - Leica R9 Bedienungsanleitung

Overview of using the flash with SCA -3501/3502M3 adapters
Setting on the flash unit (with SCA 3501):
Camera TTL-automatic
setting
X or B The operating modes m , A , T , P are no longer effective, an exposure measurement for ambient light
(any program) does not occur. The exposure generally occurs with 1/250 s at X or for any length with B with the
aperture set manually. The flash light is controlled according to the operating mode.
In the operating mode m flash exposures with shutter speeds between 16 s and 1/250 s can be made.
m
The available light is metered and controlled with the light balance. The flash light is controlled accor-
ding to the operating mode.
A The aperture priority mode is swit-
ched off, 1/250 s is always used.
T The shutter speed priority mode
active and carries out a regular expo-
sure with the available light. For this
reason the additional flash should be
reduced via flash exposure compen-
sation.
Computer automatic
The set automatic operating
mode ( A or T ) carries out a re-
*)
gular exposure with the availa-
ble light.
For this reason,
should be reduced via flash ex-
posure compensation.
*)
is
170
Manual flash with
fixed performance
The set automatic operating
mode ( A or T ) carries out a re-
gular exposure
ble light.
the flash The full flash performance is
added.
*)
with the availa-