Film Rewind - Leica R9 Bedienungsanleitung

You can see whether the film is being wound cor-
rectly in the film transport viewing window
(1.32). The lines move from top to bottom.
If this is not the case or, when using a motor, the
flashes in the frame counters (1.22, 2.10, 3.7),
the film has not been loaded properly. Open the
rear panel again and correct the loading of the film.
Note:
For automatic film threading, it is important that
the winding reel is not dirty. If necessary, you
should clean it with a moist cloth.

Film rewind

When the film has been exposed up to the last
frame, the quick wind lever can no longer be
operated or a motor being used turns itself off.
Before removing the film, it must be rewound
into the film cartridge. To do this:
1. Press the rewind release button (1.20)
2. Flip out the rewind crank (1.9)
3. Turn it in the direction of the arrow (clockwise)
to rewind the film
As soon as the lines in the film transport viewing
window come to a standstill, the film has been
rewound apart from the leader. If you want to
rewind the film completely into the cartridge
(e.g. to clearly identify it as exposed), you should
123
1.20