Operating Procedures; Serial Number Location; Before Initial Use - Ezgo MPT 48V Bedienungshandbuch

OPERATING PROCEDURES

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

SERIAL NUMBER LOCATION

Two serial number and manufacture date code plates are on the vehicle. One (PART C) is placed on the body below the front,
driver side of the seat, PART D is placed on the frame weld tube. The other (PART A and PART B) is located on the cross-
member section of the chassis on the driver side (seat back support). To access it, raise the seat and lift up the flap on the
access panel.
Design changes take place on an ongoing basis. In order to obtain correct components for the vehicle, the manufacture date
code, serial number and vehicle model mustacture date code, serial number and vehicle model must be provided when order-
ing service parts.
V
V
Lift Flap on Access Panel
Part A
Part B
Serial Number
Labels
Part D
Part C
Fig. 1 Serial Number and Location

BEFORE INITIAL USE

Read, understand and follow the safety label on the instrument panel. Be sure you understand how to operate the vehicle, its
equipment as well as how to use it safely. Maintaining good performance depends to a large extent on the operator.
Owner's Guide
Page 26