Setting The Alarm - Block IR 100 Bedienungsanleitung

Instruction Manual Wi-Fi Internet / FM Radio Model: IR 100
_____________________________________________________________________________________________________________

Setting the alarm

1. Press the SELECT button. (Note: if you make a mistake at any point, press the BACK button to go
back to the previous screen.)
2. Turn the knob until the display says <Alarm Clock>. Note, on some radios, you will need to access the
'Alarm' menu from the radio's 'Setting' menu.
<
3. Press the SELECT button.
4. Turn the knob until the display says <Set Alarms>.
<
5. Turn the knob until the display says <Set Alarm>.
<
6. Turn the knob to swap between the various alarms and 'Disable All'. Pressing the SELECT button on
'Disable All' will cause all the alarms to be turned off. The display will then say 'All alarms disabled'
for 3 seconds, then returns to the radio station display.
7. If you select one of the numbered alarms, then the radio will allow you to select the time for the alarm.
9. Turn the knob until the hour setting is correct, then press the SELECT button.
10. Turn the knob until the minute setting is correct, then press the SELECT button.
11. Turn the knob to choose between 'Once', 'Every day', 'Weekly', 'Weekdays' and 'Weekends'. If you
choose 'Once' or 'Weekly', then you will need to choose which day you would the alarm to be
activated on and then press the SELECT button.
12. Finally, you will need to select which type of alarm you would like to use: the radio's buzzer or a
station that is assigned to a preset and then press the SELECT button.
Alarm Clock
Set Alarms
1 OFF 00:00 Sunday
All alarms disabled
Set Alarm
15:06
Set Alarm
07:06
Alarm Set:
07:45
32
>
>
>