Configuring 'My Stuff; Registering An Account On Reciva's Website - Block IR 100 Bedienungsanleitung

Instruction Manual Wi-Fi Internet / FM Radio Model: IR 100
_____________________________________________________________________________________________________________
The 'Network Config' menu also allows you to choose whether or not the Internet radio displays a warning
message when its network signal strength is low. You can enable this feature by selecting 'Signal Warning'
and then selecting 'Yes'.
<Version>
Displays the versions numbers of the various parts of software and hardware on your Internet radio.
<Upgrade Firmware>
Use this option to download new firmware for the radio from the Reciva portal on the Internet. If there is
new firmware available, then the radio will prompt you if you want to download it or not. Note, at this stage,
you can press the radio's BACK button to cancel the radio beginning a firmware upgrade. A Firmware
upgrade may take several minutes, so do no switch off the power to the radio until the operation is complete
otherwise the radio may become permanently damaged.
<Language>
Allows you to change the display language.
<Factory Reset>
Puts all the settings back to their defaults as they were when they left the factory. If you perform a factory
reset on your radio you will lose all your presets and your wireless network connection.
<Register>
This will display a key that can be used to register the radio on the Reciva Customer portal:
http://www.reciva.com/
<Set Time/Date>
Use this option to set the time and date, to set an alarm and to view the current alarm setting, see "
the alarm s".
X

Configuring 'My Stuff'

Registering an account on Reciva's website

1. Open the website, http://www.reciva.com from your Internet browser.
38
Setting
X