Using Your Radio For Tuning Into Fm Stations; Setting The Clock; Setting The Time And Date - Block IR 100 Bedienungsanleitung

Instruction Manual Wi-Fi Internet / FM Radio Model: IR 100
_____________________________________________________________________________________________________________

Using your radio for tuning into FM stations

If your radio supports an FM tuner, then you will be able to access standard FM stations from it.
1. You can access the radio's FM tuner by pressing the 'Mode'. Pressing the 'Mode' button again , turn to
Internet radio again.
You can also access the FM tuner by selecting the 'Tuner' menu item from the radio's main menu.
2. Whilst the radio is in its FM tuner state, it will display what FM frequency it is currently tuned into.
Turning the rotary encoder clockwise will increase the FM frequency the radio is tuned into and
turning it anticlockwise will decrease the frequency.
3. Press TUNE+/- button on front panel or remote control to auto search next / previous station.
4. To save an FM frequency to the radio's memory, press and hold down a preset button in the same way
that you would save an Internet station to a preset.
5. To access a saved FM frequency, simply press the preset button assigned to the saved frequency.

Setting the time and date

1. Press the SELECT button. (Note: if you make a mistake at any point, press the BACK button to go
back to the previous screen.)
2. Turn the knob until the display says <Settings>.
3. Press the SELECT button.
4. Turn the knob until the display says <Set Time/Date>.
5. Press the SELECT button.
6. Turn the knob until the hour setting is correct, then press the SELECT button.
7. Turn the knob until the minute setting is correct, then press the SELECT button.
8. After finished set time, display will come to Set Date section, the operation is same as Set Time.
< Settings
< Set Time/Date
Set Time
14:03
Set Time
15:03
Set Date
15:06
>
>
31