Locating And Playing Media Files Using The Radio And Upnp - Block IR 100 Bedienungsanleitung

Instruction Manual Wi-Fi Internet / FM Radio Model: IR 100
_____________________________________________________________________________________________________________
5. From the 'Media Sharing' window, the radio will be listed as an unknown device. Click on the unknown
device listed, then click the 'Allow' button and then click 'OK'.
Allowing the Radio to Connect:
Locating and playing media files using the radio and
UPnP
1. Once the UPnP server is configured to share media files with the Internet radio, you can play the files by
doing the following on the radio.
2. Keep pressing BACK to get to the radio's top-level menu and then turn the knob to select 'Media Player'.
3. Press SELECT and then turn the knob to section 'UPNP Servers'.
4. Press SELECT and the radio will scan for all available UPnP servers. Note, this may take a few seconds
for the radio to complete its scan and before the scan has completed, the radio will display '[Empty]'. The
radio will continue to display '[Empty]' if no UPnP servers are found.
5. After a successful scan, select your UPnP server, by rotating the knob if there is more than one UPnP server,
and then press SELECT.
6. The radio will now list the media categories available from the UPnP server, e.g. 'Music', 'Playlists' etc.
Turn the knob to select which category you wish to browse, press SELECT and turn the knob to a sub
category and press SELECT again. For example, you could select 'Music' and then 'Album'.
7. Turn the knob to the media files that you wish to play and press SELECT.
8. The radio will display '[Add to Queue]', press SELECT and the radio will add the tracks to its queue and
begin playing them automatically.
34