Troubleshooting - Block IR 100 Bedienungsanleitung

Instruction Manual Wi-Fi Internet / FM Radio Model: IR 100
_____________________________________________________________________________________________________________
2. From your 'My Podcasts' section, you can add your chosen podcast by entering in the podcast's name
and its URL as prompted by the website. Please note, the podcast URL will have to be a direct RSS
feed which will end with the '.xml' extension e.g. http://someurl.com/podcast.xml
3. Once you have podcasts available in your 'My Podcasts' list, you may access these feeds from your
Internet Radio. These podcasts will be available on your radio from the menu item: 'Stations > My
Stuff > My Podcasts'. Please note, the podcasts will only be available to your radio once your radio has
downloaded a new stations' list. To cause the radio to download a new stations' list immediately,
please remove and reconnect the power to your radio.

Troubleshooting

If you experience any trouble with your wireless Internet radio, then you may find it useful to visit the help section
on our webpage: http://www.reciva.com
If you have trouble connecting the radio to your wireless network, these steps may help to resolve the problem:
1. Confirm that a Wi-Fi connected PC can access the Internet (i.e. can browse the web) using the same network.
2. Check that a DHCP server is available, or that you have configured a static IP address on the radio. You can
configure a static IP address on the radio using the menu item 'Settings -> Network Config -> Edit Config', and then
select 'No' for 'Auto (DHCP)'.
3. Check that your network's firewall is not blocking any outgoing ports. As a minimum, the radio needs access to
UDP and TCP ports 80, 554, 1755, 5000, 6000 and 7070.
4. Check your access point does not restrict connections to particular MAC addresses. You can view the radio's
MAC address using the menu item 'Settings -> Network Config -> View Config -> MAC address'.
5. If you have an encrypted network, check that you have entered the correct key or passphrase into the radio.
Remember that text-format keys are case sensitive. If, when attempting to connect to an encrypted network, your
radio displays: 'Wireless error' followed by a 5-digit number, then please ensure that you enter the correct
passphrase for the network. If the problem persists, then you may need to consult your network configuration.
If your radio can connect to the network successfully, but is unable to play particular stations, it may be due to one of
the following causes:
1. The station is not broadcasting at this time of the day (remember it may be located in a different time zone).
2. The station has reached the maximum allowed number of simultaneous listeners.
3. The station is not broadcasting anymore.
40