List Of Key Operations - Korg padKONTROL Bedienungsanleitung

Play mode (performing)
Recall a scene
Use the Roll function
Use the Flam function
Use the Hold function
Transmit a program change
Transmit a message
Fix the velocity value
Setting mode (editing)
Enter Setting mode
Return from Setting mode to Play mode
Cancel while editing
Save a scene
Setting mode
Key Trigger Pad
[NOTE/CC#/LEFT] Note#[C-1...G9] /
CC#[0...127]
[MIDI CH/RIGHT] MIDI CH
[Disable/1...16]
[SW TYPE/POLARITY] Switch Type
[Momentary/Toggle]
[REL . VAL./LOWER] Release Value[0...127]
(only if cc is assigned)
[VELOCITY/UPPER] Velocity Curve(Note)
On Value[0...127] (cc)
[PORT] USB-MIDI Port
[PORT A/PORT B]

List of key operations

Hold down the [SCENE] key and press a trigger pad [1]...[16]
Press the [ROLL] key
Press the [FLAM] key
Press the [HOLD] key
Hold down the [PROG CHANGE/WRITE/ALL PAD] key and turn the encoder
Hold down the [MESSAGE/EXIT] key and press a trigger pad [1]...[8]
Press the [FIXED VELOCITY/PRELOAD] key
Press the [SETTING/ENTER] key
Press the [SETTING/ENTER] key
Press the [MESSAGE/EXIT] key
Hold down the [SCENE] key and press the [PROG CHANGE/WRITE/ALL PAD] key
Pedal X-Y Pad
Note#[C-1...G9] / Message Type
CC#[0...127] [No Assign/Pitch Bend
/After Touch/CC#]
MIDI CH
[Disable/1...16]
Switch Type Polarity
[Momentary/Toggle] [Normal/Reverse]
Release Value[0...127] Release Value
(only if cc is assigned) [0...127/-128...127]
Velocity Curve(Note)
On Value[0...127] (cc)
USB-MIDI Port
[PORT A/PORT B]
30
Knob1/2 Flam
Message Type Interval Left
[No Assign/Pitch Bend [0...255]
/After Touch/CC#]
Interval Right
[0...255]
Polarity
[Normal/Reverse]
Volume Lower
[1...127]
Volume Upper
[1...127]
Roll
Speed Left
[40...240]
Interval Right
[40...240]
Expression Lower
[1...127]
Expression Upper
[1...127]