Storing Settings In The Program Memory Key - Korg KAOSS PAD K72 Bedienungsanleitung

Edit mode ( p.8), and make "MIDI message
transmission/reception settings" (
these messages will be received.
You can not use the Tap Tempo or Auto
BPM functions while the KP2 is receiving Tim-
ing Clock from an external MIDI device
9. Storing settings in the Program
Memory key
The current state of the KAOSS PAD can be
stored in one of the Program Memory 1–8
keys, so that it can be instantly recalled
whenever you want.
Stored contents
— Effect program
— On/off state of the Hold key and the held
position (coordinates)
— FX/Depth knob setting
— For the "BPM FX/PTN" group, the speci-
fied BPM value
— For the "SAMPLE/PLAY" group, the
Sample 1, 2 key used
Effect programs 60 and 90–99 do not store
the state of the Hold key.
To store settings
(1) Press the Program Memory 1–8 key that
you want to assign.
(2) Use the Program/BPM knob to select
the effect program that you want to assign.
If you want to store the setting of the Hold
key, select the program and then turn on the
Hold key and touch the touch pad to specify the
position. If you want to store other settings,
make them at this time.
(3) Press and hold down the Program
Memory 1–8 key you selected in step (1) for
approximately two seconds, and the set-
tings will be stored.
When the settings have been stored, the
Program/BPM display will stop blinking.
To recall settings
(1) Press a Program Memory 1–8 key, and
the settings stored in that key will be re-
called.
6
10. Sampling and playing back
p.8) so that
a phrase
A phrase from the audio input can be re-
corded into one of the Sample 1, 2 keys.
Then when you have selected a program
from the "SAMPLE/PLAY" group (pro-
grams 90–99), you can play back the sample
while using the touch pad to control the
playback speed or reverse-playback. If you
have selected a program from other than the
"SAMPLE/PLAY" group, pressing the
Sample 1, 2 keys will play back the phrase
that was recorded in that key.
You can record for approximately six sec-
onds in each of the two keys.
The recorded phrases will be lost when the
power is turned off. It is not possible to save the
recorded phrases.
Recording
(1) Press the Rec/Stop key, and the Rec/
Stop key LED will blink to indicate that you
are in record-ready mode.
(2) Press the Sample 1, 2 key into which you
want to record. At this time, you will not
hear the playback sound.
(3) When you press the Rec/Stop key, the
Rec/Stop key LED will light, and recording
will begin. Recording will stop when you
press the Rec/Stop key once again.
Recording will stop automatically when
you reach the maximum recording time.
For programs of other than the "SAMPLE/
PLAY" group, you can operate the touch pad
while you record, and the sound processed by the
effect will be recorded.
Auto recording (AUTO REC)
You can cause recording to begin automati-
cally when audio is input. This is conve-
nient when recording voice from a mic.
(1) In step (2) of the Recording procedure,
hold down the Sample 1, 2 key to which you
want to record, and press the Rec/Stop key.
The Rec/Stop key and Sample 1, 2 key
LEDs will blink simultaneously, indicating
that you are in record-ready mode.
(2) Recording will begin automatically