Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch XEO Originalbetriebsanleitung

OBJ_BUCH-377-007.book Page 19 Tuesday, August 9, 2011 10:13 AM
9 Socket for charge connector
10 Plug connector for charger
11 Blade screw
12 Cutting adapter*
*Accessories shown or described are not part of the standard delivery scope of the
product. A complete overview of accessories can be found in our accessories program.

Technical Data

Cordless Universal Cutter
Article number
Rated voltage
No-load speed
Cutting capacity/charged battery
(6 mm carpet, enforced) approx.
Weight according to EPTA-Procedure
01/2003
Battery
Capacity
Battery Charger
Article number
Charging time
Please observe the article number on the type plate of your machine. The trade names of the
individual machines may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product is less than
70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
h
ing to EN 60745:
2
a <2.5 m/s , K=1.5 m/s
h
The vibration emission level given in this information sheet has been measured
in accordance with a standardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different acces-
sories or poorly maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the effects of vi-
bration such as: maintain the tool and the accessories, keep the hands warm, or-
ganisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with the following standards or standardization
documents: EN 60745 (battery powered products) and EN 60335 (battery
chargers) according to the provisions of the directives 2011/65/EU,
2006/95/EC, 2004/108/EC, 2006/42/EC.
Bosch Power Tools
(triax vector sum) and uncertainty K determined accord-
2
.
English | 19
3 603 B05 1..
V
-1
min
m
kg
Li-Ion
Ah
2 607 225 243
UK: 2 607 225 247
h
1 609 929 W36 | (9.8.11)
Xeo
3.6
240
150
0.4
1.3
3–5