Product Features; Technical Data - Bosch IXO serie Originalbetriebsanleitung

16 | English

Product Features

The numbering of the product features shown refers to the illustrations on
the graphic pages.
(1) Cutting adapter
(2) Guide runner
(3) Protective guard
(4) Unlocking ring
(5) Rotational direction switch
(6) On/off switch
(7) Screw for securing the blade
(8) Cutting blade
(9) Rubber cap

Technical Data

Cutting adapter
Article number
Weight according to
EPTA-Procedure 01:2014
Assembly
Attaching the cutting adapter (see figures A1–A2)
– Before fitting the cutting adapter (1), the rubber cap (9) of the screw-
driver must be pulled off toward the front.
– Then attach the cutting adapter to the screwdriver. The cutting adapter
must audibly engage.
Note: You can attach the cutting adapter in 8 different positions. This en-
ables you to achieve the optimum working position, e.g. for cutting a floor
covering along a wall.
Removal (see figures B1–B2)
– Turn the unlocking ring (4) in rotational direction ➊ and pull off the cut-
ting adapter toward the front (➋).
1 609 92A 5LZ | (07.04.2020)
Cutter
1 600 A00 1YN
kg
Bosch Power Tools
0.15